1. The injection device and the locking device are on the same vertical centerline, and the mold opens and closes in the up-down direction. Its land area is only about half of that of a horizontal machine, so when converted to land area, its productivity is about twice as high.

2. Easy to achieve insert molding. Because the surface of the mold is facing upwards, it is easy to position the insert. If a machine model with a fixed lower template and a movable upper template is used, and the belt conveyor is combined with a robotic hand, fully automatic insert molding can be easily achieved.

3. The weight of the mold is supported by a horizontal template for up and down opening and closing actions, without the phenomenon of the mold being unable to open and close due to the gravity of the mold, similar to that of a horizontal machine. Beneficial for maintaining the precision of machinery and molds with durability.

4. Various plastic mold cavities can be removed through a simple robotic arm, which is beneficial for precision molding.

5. The general locking device is surrounded by an open type, which is easy to configure various automation devices and suitable for the automatic molding of complex and exquisite products.

6. The belt conveyor device is easy to install through the middle of the mold, making it convenient for automatic production of molding.

7. It is easy to ensure the consistency of resin fluidity and mold temperature distribution inside the mold.

8. Equipped with rotating tabletops, mobile tabletops, and inclined tabletops, it is easy to achieve embedded molding and in mold combination molding.

During small-scale trial production, the mold structure is simple, cost-effective, and easy to disassemble and assemble.

10. After being tested by multiple earthquakes, the vertical robotic arm has a low center of gravity,